Easing dental fear

Advantages for the dentist. Advantages for the patient.

Conscious sedation has been a widely used technique across the world for a number of years. The controlled administration of inhaled oxygen and nitrous oxide induces a sense of relaxation, reducing emotional charge, pain perception and anxiety, increasing the patient’s tractability and facilitating cooperation with the dentist, while maintaining protective reflexes.

Advantages for the dentist:


  • Easy to use
  • Suitable for all patients
  • Extremely economical and versatile
  • Extremely safe method
  • Reduced chair-side stress for the operator
  • Reduced chair time for the operator

Advantages for the patient:


  • Reduced anxiety and fear
  • Increased compliance and cooperation

 

The five advantages of the Intelliflux system


The Intelliflux system allows the coupled circuit tubes to be positioned above the patient’s head, on either the right or left side, allowing the dentist to work comfortably on the area to be treated without having any tubes in the way.

Maximum working
ergonomics

Perfectly suitable for working with four hands. Circuit joint located above the patient’s head does not create any obstacles to treatment… suitable for all dental practices with a focus on surgery.


Pleasant treatment
 

The sedated patient has a pleasant experience breathing through a mask that leaves no marks on their face. The frontal support, the elastic strap and the locking system to the dental unit headrest ensure perfect stability.


Maximum stability
 

Extremely stable masks thanks to a rigid polycarbonate central body and a soft silicone profile.

STABILISES AND AVOIDS DISPERSION.


Effective and efficient conscious sedation

The perfect fit of the masks, which adapt to any face shape, allows for faster and more efficient conscious sedation treatment. Rigid polycarbonate central unit + soft silicone profile for maximum grip and stability.


No leakage
into the environment

The special construction of Intelliflux masks prevents gas leakage into the environment:

  • Check valve
  • Adaptive connector for dental unit suction system
  • New ‘easy breathe’ membrane
  • Adaptive silicone bearing

INTELLIFLUX

Ergonomics

Perfectly adapted to the surface of the face and total reduction of gases exhaled into the environment.

Safety

This device avoids gas leakage into the environment.

Simplicity

Easy-to-install tubes with anti-stretch system.

Hygiene

Autoclavable masks for maximum hygiene.

Comfort

Adaptive silicone profile for all face types, does not leave a mark and ensures top comfort.

Practicality

Sufficient length of the tubes so as not to get in the way when working with four hands.

What can you sterilise?

Safety always comes first

SEE THE AUTOCLAVABLE PARTS OF THE INTELLIFLUX CIRCUIT

As the European leader in sterilisation, , Tecno-Gaz publishes good practice on the use of masks to prevent cross-contamination, as recommended by European legislation: EN 13060, EN17665-1, EN556-1 and the Spaulding classification. Spaulding defines the criticality of instruments used during dental treatment (critical, semi-critical, non-critical) according to their use and the possibility of contact with the patient’s skin and/or gum and tissue.
The following can be sterilised:

  • Masks made of silicone (latex-free) and polycarbonate at 134°C
  • Special autoclavable tubes (on demand) at 121°C or 134°C.

The neck strap and single-use tubes must, however, be disposed of after use.


Silicone masks

FOUR MASKS SUITABLE FOR EACH TYPE OF PATIENT
(CHILDREN AND ADULTS)

Masks with one-size-fits-all silicone front support and nasal profile in various sizes:

  • Size 1 - XS
  • Size 2 - S
  • Size 3 - M
  • Size 4 - L

Autoclavable at 134°C. Minimum: 30 cycles.


Masks structure

COMFORTABLE AND FUNCTIONAL IN ANY SITUATION

  1. Patient frontal area support.
  2. Gas outlet with check valve.
  3. Gas inlet with check valve.
  4. Soft, adaptive membranes to facilitate breathing.
  5. Rigid polycarbonate front unit for maximum seal with no leakage and safe for operator.

Intended use


The TECNO-GAZ circuits and masks are accessories of device Master Flux and should only be used with the device Master Flux for the supply of medical gases to the patient.
TECNO-GAZ is not responsible if the circuits and masks are used in a manner different from that stated above.
TECNO-GAZ is not liable for misuse of circuits and masks.
The masks are sold separately from the MASTER FLUX ONLY AS PARTS OF THE DEVICE.

Spares and accessories

One-size-fits-all silicone front support and and nasal profile in various sizes.

Autoclavable at 134°C. Minimum: 30 cycles

  • Size 1 - XS Item No. 2ZMFA0050
  • Size 2 - S Item No. 2ZMFA0051
  • Size 3 - M Item No. 2ZMFA0052
  • Size 4 - L Item No. 2ZMFA0054

Autoclavable circuit tube

Autoclavable at 134°C. Minimum: 30 cycles

Length 1,5 metres Item No. 3MEDT0018


Single-use circuit tube

DISPOSABLE TUBE ON A ROLL

Length 50 metres with dividers Item No. 3MEDT0019


What makes Intelliflux different to other circuits on the market?

Defects in the traditional circuit

  • It is difficult to access the oral cavity with the practitioner’s instruments due to tubes passing through the cheekbone area.
  • Masks leave a mark on patients’ faces.

Defects in the non-invasive circuit

  • Leakage into the environmentand precarious stability due to sticky substance attack.
  • Rubbery material does not have a rigid core and it does not prevent distortion and loss of seal.
  • They are disposable and the cost per treatment is high.

Contact!

info@tecnogaz.com

+39 0521 8380

Strada Cavalli, 4 - Sala Baganza - Parma - Italia